Sprinkler systems are important tools in maintaining a beautiful, lush lawn, but they need regular maintenance to continue to work properly and not cause damage. One crucial maintenance task is winterizing your sprinkler system in the fall before temperatures dip down to freezing. Preparing your sprinkler system for winter weather will prevent water from freezing inside the hose, which can crack the fittings and burst your pipes.
Here is a step-by-step guide for winterizing your sprinkler system:
- Shut off the water supply. Locate the main shut-off valve for your sprinkler system and turn it off to prevent any more water from entering the system.
- Adjust the timer. This next step involves turning off the automatic timer for your sprinkler system. Most modern systems have a “rain mode” or “off” setting that will disable the system without losing your programmed schedule, allowing you to easily resume operations in the spring.
- Drain the water. There are three different ways to drain your sprinkler system depending on what kind of system you have:
- Manual drain valve: Slowly open all main drain valves (remember to wear eye protection if your system is under pressure) and allow water to escape. Once the water stops flowing, close the valves.
- Automatic drain valve: These valves will automatically drain water when the pressure in the system drops below a certain level. Simply turn off the water supply and the valves will do the rest.
- Blow-out method: Although this maybe be the most effective method to draining the water from your sprinkler system, it can be dangerous to do on a system that wasn’t built for it, so it’s best to leave this method to professionals. The blow-out method involves using an air compressor to blow any remaining water out of your system.
- Insulate above-ground components. Protect any exposed components of your sprinkler system, such as backflow preventers and valves, with insulation. Foam covers or insulation tape can be used to safeguard these parts from freezing temperatures. Avoid blocking any air vents or drain outlets on the backflow preventers.
- Inspect and clean. While you’re winterizing your sprinkler system, clean debris and dirt from sprinkler heads and other system components. Also, check for any damage that may need attention before the next watering season.
- Remember that timing is key. Don’t wait until the first freeze is forecasted to winterize your system. Aim to complete this important task before temperatures drop into the freezing zone.
The lawn care experts at Best Bet Lawn Care are here to save you time and money by providing comprehensive sprinkler winterization services that will take the headache out of caring for your sprinkler system. Contact us today to request a quote!
Be sure to check back regularly for more lawn care tips that will save you time and money, and will keep your lawn looking its best!
